Crown Trade Matt Vinyl Emulsion.
A premium quality matt water based emulsion for interior use on wall and ceiling surfaces, where a flat non-reflective finish is required.
There’s a number of ways you can choose a paint colour:
From the RAL Classic range by clicking on the colour grid provided.
Or contact us if you a have a specific colour in mind and we can tell you whether we can make it for you.
We are available via WhatsApp – click here:
And email: mididecorstchinian@gmail.com
Crown Trade Matt Vinyl has excellent opacity, with good colour retention.
Also, a low sheen finish which is quick drying and is a true flat matt
Limitations:
Matt Vinyl is for interior use only.
Do not apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80% during application or the drying period.
The paint is touch dry in 1 hour and recoatable after 4 hours.
Preparation:
Surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied – e.g. dirt, grease etc.
Porous surfaces should be coated with a ‘mist’ coat of Crown Trade Matt Vinyl diluted with 40% clean water by volume.
Remove all loose, failing or suspect paint.
Fill any fixing holes, cracks and shallow surface defects with a filler.
Any glossy or eggshell surfaces should be wet abraded to provide a key.
Rinse with clean water to remove all residues.
Allow to dry.
Coating System:
Apply two coats as required.
Certain colours may require additional coats to give complete obliteration.
Application:
Stir well before use.
Apply by brush or medium roller.
For airless spray (dilution may be
required).
For further information contact the Crown Trade Customer Relations Team.
Cleaning:
Return surplus material to container.
Wash your brush or roller with clean water immediately after use.
