Berger – Matt Emulsion – 1L – White.
Water based Berger Matt Emulsion is ideal for all living areas.
It gives a flat finish and is ideal for helping to disguise uneven surfaces, therefore can be used on walls and ceilings.
For interior use only.
Don’t apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80%.
PREPARATION:
New Surfaces:
Surfaces must be sound, clean, dry and free from anything that will interfere with the adhesion of the materials.
Porous surfaces should be coated with a ‘mist’ coat of Matt Vinyl diluted with 40% clean water.
Surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Remove all loose paint, fill holes, cracks and shallow surface defects with a filler.
Wash the surface with hot water and Sugar Soap to remove any contaminants.
Any glossy or eggshell surfaces should be wet abraded to provide a key before painting.
COATING SYSTEM:
Apply two or more coats, as certain colours may require additional coats to give complete obliteration.
APPLICATION:
Stir well before, and during use, apply using good quality tools, like a synthetic brush (Cervus), or a medium pile roller.
If using an airless spray, dilution may be required.
CLEANING:
Return any surplus material to container and wash your tools & equipment with clean water or warm soapy solution immediately after use.
STORAGE:
Store upright and secure and store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage.
Don’t store in a place where the temperature may drop below 5ºC or go above 40ºC.
Available via WhatsApp – click here:
