Rustins - Outdoor Clear Varnish - Satin - 250ml 500ml & 1L

Rustins – Outdoor Clear Varnish – Satin – 250ml 500ml & 1L

#!trpst#trp-gettext data-trpgettextoriginal=5785#!trpen# #!trpst#/trp-gettext#!trpen##!trpst#trp-gettext data-trpgettextoriginal=5786#!trpen#Plage de prix : 15,00 € à 46,00 €#!trpst#/trp-gettext#!trpen#

Outdoor Varnish Satin.

A quick-drying, durable, clear coating which gives a long lasting protection to all external wood and is touch dry in 30 minutes

#!trpst#trp-gettext data-trpgettextoriginal=276#!trpen#UGS :#!trpst#/trp-gettext#!trpen# #!trpst#trp-gettext data-trpgettextoriginal=273#!trpen#ND#!trpst#/trp-gettext#!trpen# #!trpst#trp-gettext data-trpgettextoriginal=121#!trpen#Catégorie :#!trpst#/trp-gettext#!trpen# #!trpst#trp-gettext data-trpgettextoriginal=4974#!trpen#Étiquettes :#!trpst#/trp-gettext#!trpen# , , , , , #!trpst#trp-gettext data-trpgettextoriginal=4922#!trpen#Marque : #!trpst#/trp-gettext#!trpen#

Rustins Outdoor Clear Varnish Satin

Rustins Outdoor Clear Varnish Satin – A quick-drying, durable, clear coating which gives a long lasting protection to all external wood and is touch dry in 30 minutes, re-coatable in 4 hours.

Intended Use:

Exterior joinery both hard & softwood, doors, windows, garden furniture, conservatories.
May also be used as a sealer for concrete.

Special Features:

Low odour, non-yellowing, resists cracking, peeling, blistering.
The varnish has very little effect on the colour of the timber that it is applied to.

Preparation:

Surfaces must be clean, dry and free of wax, grease and contaminants, smooth and sound.
Fill large cracks, open joints and damaged areas with a high quality flexible filler.
Wash oily woods, knots or resinous areas with white spirit.
Remove mould, lichens, algae & moss with brush, scraper & domestic bleach, then rinse thoroughly and allow to dry.

Application:

STIR WELL BEFORE USE.
Using a synthetic brush, apply liberally with a full brush finishing with the grain.
The first coat may be diluted with water on hot days (up to 15%).
Do not apply to hot surfaces or in strong sunlight if possible or if rain is likely.

Coats – Apply 3 coats and lightly sand after 1st coat if there is raising of the grain.

Drying Time – Touch dry 30 minutes. (On hot days may be touch dry within 10 minutes).

Re-coating Time –  4 hours minimum, depending on temperature & humidity.

Application Temperature – Ideally 15-25°C. Do not apply below 10°C, or in high humidity or if rain expected.

Coverage – 12-15sq.m per litre, 1 coat, depending on absorbency of surface.

Maintenance – Re-coat every 2 to 3 years. Clean with a mild detergent solution and lightly sand to provide key.

Compatibility – May be applied over old existing coating if these are in good condition and rubbed down to provide a key.

Shelf-life/Storage:

Many years if stored in original, tightly closed container in normal conditions. PROTECT FROM FROST.

Clean-Up:

Clean with water whilst brush is still wet.

We are available via WhatsApp – click here:
#!trpst#trp-gettext data-trpgettextoriginal=127#!trpen#Poids#!trpst#/trp-gettext#!trpen# 0,7 #!trpst#trp-gettext data-trpgettextoriginal=4816#!trpen#kg#!trpst#/trp-gettext#!trpen#
Size

1L, 250ml, 500ml

#!trpst#trp-gettext data-trpgettextoriginal=128#!trpen#Produits similaires#!trpst#/trp-gettext#!trpen#