Solvent based,  Silicone Alkyd High Heat Paint.

Intended Use:

The paint is only suitable for use on ferrous metals, such as wood burning stoves, barbeques, domestic and industrial stoves, furnace chimneys, grates and exhausts.

A fast drying, protective and decorative paint suitable for temperatures of up to 600° C

Préparation :

The surface must be clean, dry and free from grease, dust rust and other contaminants.
Remove all rust with a scrapper.

Application :

Stir well before use until there is no sediment on the bottom of the tin.
Apply with a bristle paint brush.
The paint may be sprayed but may require dilution with Xylene Thinners.

Coats – Only one light coat should be applied.
If a heavy coat or more than one coat is applied it is possible that the paint will flake from the surface.

Drying Time – The surface will be touch dry within 15 minutes and can be handled in 1 hour in good
conditions.
The painted article if air dried will become fully cured once it has been heated up to between 200 – 220° C for approximately 20 minutes.
Re-coating Time –  The paint should not be recoated.
Application Temp. – Ideally 15-25°C. Do not use below 10°C, or in conditions of high humidity.
Couverture –  15 sq metres/litre per coat depending type of application and surface.
Maintenance –  The previous coat will need to be removed if recoating becomes necessary.
Settlement – Stir well before use.

Shelf-life/Storage:

The shelf life of the product is 2 years.
It is preferable to store the product in a cool place.
It is important to replace the lid and ensure an airtight seal after use.
NOTE: The product may be used after shelf life has expired but should first be checked to ensure that there is no deterioration
of quality.

Nous sommes disponibles via WhatsApp - cliquez ici : 

The post Rustins – High Heat Black Paint 250ml & 500ml appeared first on Midi Décor St Chinian.