Crown Trade – Full Gloss – 1L – RAL 6021.
RAL colour 6021 has the colour name Pale green.
Cette couleur RAL est dans la catégorie des Green hues qui fait partie du système de couleurs RAL Classic. colour system.
A high quality decorative and protective finish for use over correctly prepared joinery and metal.
– High gloss
– For interior and exterior use
– Exceptionally hard wearing and flexible finish
– Excellent opacity and film build
– High gloss and colour retention
– Good flow properties
Drying Time:
In good conditions: touch dry after 6 hours and recoatable after 16 – 24 hours.
Ensure previous coat is fully dry before application.
A characteristic of the new technology used in this product is that whiteness intensifies as the paint dries.
Couverture :
12-15m² per litre depending on surface texture.
Weather conditions:
Do not apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80% during application or the drying period.
Do not over apply.
Note: Ensure previous coat is fully dry before application, colder conditions will extend the drying period.
Préparation :
All new metals:
Lightly abrade to a bright (not polished) surface – excluding galvanised surfaces.
Wash with hot water and liquid detergent solution to remove oil, grease or any other contaminants, frequently changing the water.
Rinse thoroughly with clean water.
Allow to dry, then prime.
New Wood Surfaces :
Toutes les surfaces doivent être saines, propres, convenablement sèches et exemptes de tout ce qui pourrait interférer avec l’adhérence des matériaux à appliquer.
Rub down with a suitable grade of abrasive paper and round sharp edges to a 1-3mm radius.
Remove all dust.
Timber with oils/extractives must be swabbed with clean methylated spirits, frequently changing the face of the cloths.
Treat any knots with two coats of fresh knotting.
Fill any fixing holes, open joints and shallow surface defects with a filler.
Apply a primer and undercoat.
Previously Decorated Wood:
Toutes les surfaces doivent être saines, propres, convenablement sèches et exemptes de tout ce qui pourrait interférer avec l’adhérence des matériaux à appliquer.
Retirez toute la peinture lâche, défaillante ou suspecte.
Remove grey and denatured surfaces by rubbing down with abrasive paper.
Feather edges of sound paint.
Remove all dust.
Remove any defective putty glazing, clean and prime rebates, replacement putties must be allowed to form a hard skin.
Treat knots with two thin coats of fresh knotting.
Fill any fixing holes, cracks and shallow surface defects with a filler.
Wash remaining sound paint with hot water and liquid detergent solution to remove any contaminants, frequently changing the water.
Wet abrade to provide a key.
Rinse with clean water to remove all residues.
Allow to dry.
APPLICATION of Full Gloss:
Stir well before and during use.
Apply using good quality tools – synthetic or bristle brush or short/medium pile roller.
Maintain a wet edge.
NETTOYAGE :
Return surplus material to container.
Wash tools & equipment with White Spirit immediately after use.
STOCKAGE : Store upright and secure.
Store in secure dry conditions inaccessible to children or animals.
Les conteneurs doivent être gardés fermés pendant le stockage.
Do not store below 5ºC or above 40ºC.
