Rustins – Matt Black – 250ml – 500ml – 1L – 2.5L<\/p>\n
A dense black matt paint based on water borne self cross-linking acrylic resin.
\nFor all interior and exterior bare, hardboard, MDF, plaster, brickwork, cement and wrought iron.
\nCan be used over existing wood and metal primers and over existing paints.
\nSpecial Features:
\nQuick drying.
\nExcellent covering power.
\nClean brushes with water.
\nContains special matting agents so that paint dries with a Matt finish.<\/p>\n
Surfaces to be coated must be clean, dry and free from wax, grease and contaminants.
\nFill holes and cracks with a filler.
\nOver existing paint, the surface must be cleaned and lightly sanded to provide a key before application.<\/p>\n
Stir before use.
\nApply liberally and evenly with synthetic fibre brush or roller.
\nCoats 1 or 2 coats depending on requirements.<\/p>\n
Touch dry within 30 minutes, depending upon temperature and humidity.
\nRe-coating Time 2 hours minimum, depending upon temperature and humidity.
\nApplication Temp.
\nIdeally 15-25\u00b0C.
\nDo not use below 10\u00b0C, or in conditions of high humidity.<\/p>\n
Approximately 12-14 Sq. mt. per litre, 1 coat, depending on the absorbency of the surface.<\/p>\n
Clean painted surfaces with a mild detergent solution.<\/p>\n
Compatibility:<\/p>\n
May be applied over solvent and acrylic paint.<\/p>\n
Settlement:
\nSTIR WELL BEFORE USE.
\nEnsure any sediment is thoroughly mixed in.<\/p>\n
Shelf-life\/Storage:
\nMany years if stored in original tightly closed container in normal conditions.
\nDo not store below 5\u00b0C. Protect from frost.<\/p>\n
Clean-Up:
\nClean brushes and hands immediately after use with water.<\/p>\n