You can choose a paint colour from the RAL Classic range by clicking on the colour grid provided or contact us if you a have a specific colour in mind and we can tell you whether we can make it for you.

We are available via WhatsApp – click here:
And email: mididecorstchinian@gmail.com

Crown Trade Matt Vinyl has excellent opacity with good colour retention and a low sheen finish, which is quick drying. A true flat matt

Limitations:

Matt Vinyl is for interior use only.

Do not apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80% during application or the drying period.

The paint is touch dry in 1 hour and recoatable after 4 hours.

Preparation:

All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Porous surfaces should be coated with a ‘mist’ coat of Crown Trade Matt Vinyl diluted with 40% clean water by volume.
Remove all loose, failing or suspect paint.
Fill any fixing holes, cracks and shallow surface defects with a filler.
Any glossy or eggshell surfaces should be wet abraded to provide a key.
Rinse with clean water to remove all residues.
Allow to dry.

Coating System:

Apply two coats.
Certain colours may require additional coats to give complete coverage.

Application:

Stir well before use.
Apply using good quality tools – synthetic brush or medium pile roller.
For airless spray dilution may be required.
For further information follow the spray manufacturer’s guidelines.

Cleaning:

Return surplus material to container. Wash tools & equipment with clean water or a warm soapy solution & rinse immediately after use.

Storage:

Store upright and secure.
Store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage.
Do not store below 5ºC or above 40ºC.

The post Crown Trade – Matt Vinyl – Colour – 1L appeared first on Midi Décor St Chinian.

A premium quality silk emulsion for interior use on wall and ceiling surfaces where a washable high sheen finish is required.

You can choose a paint colour from the RAL Classic range by clicking on the colour grid provided or contact us if you a have a specific colour in mind and we can tell you whether we can make it for you.

We are available via WhatsApp – click here:
And email: mididecorstchinian@gmail.com

Preparation:

New Surfaces:
All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Porous surfaces should be coated with a ‘mist’ coat of Crown Trade Silk Vinyl diluted with 40% clean water by volume.

Previously Decorated Surfaces:
Surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Remove loose, failing or suspect paint.
Fill holes, cracks and shallow surface defects with a filler.
Wash paint with hot water and sugar soap to remove any contaminants.
Glossy or eggshell surfaces should be wet abraded to provide a key.
Rinse with clean water.
Allow to dry.

Coating System:

Apply two coats.
Certain colours may require additional coats to give complete coverage.
Do not apply when air or substrate temperatures are likely to fall below 8ºC.
Relative humidity must be below 80% during application and the drying period.

Application:

Stir well before use.
Apply with a brush Cervus or a medium pile roller.
For airless spray, dilution may be required.

Cleaning:

Return surplus material to the container.
Wash brushes and rollers with clean water immediately after use.

Storage:

Store upright and secure.
Store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage.
Do not store below 5ºC or above 40ºC.

The post Crown Trade – Silk Vinyl – Colour – 2.5L appeared first on Midi Décor St Chinian.

FastFlow Quick Dry Satin Finish has an excellent opacity, and a fabulous smooth, attractive finish.

The paint has all the characteristics of a traditional solvent based satin, with the added benefits of a water based formulation, including quick drying and low odour.

You can choose a paint colour from the RAL Classic range by clicking on the colour grid provided or contact us if you a have a specific colour in mind and we can tell you whether we can make it for you.

We are available via WhatsApp – click here:
And email: mididecorstchinian@gmail.com

Drying Time:

In good conditions, Fastflow is touch dry after 1-2 hours and recoatable in 4-6 hours but always ensure that the previous coat is fully dry though before applying a second coat.
During low temperatures or high humidity, drying times may be extended.
Fastflow finishes to a satin sheen.

Coverage:

Can cover up to 15m² per litre depending on the surface texture.

Limitations:

Don’t apply when the air or substrate temperatures are likely to fall below 8°C, or when the relative humidity is above 80% during application or the drying period, as this could affect the adhesion of the paint to the surface.

How to prepare new surface timber and timber based boards (Including MDF):

Seal any knots and fill fixing holes, open joints and shallow surface defects with a filler.
Rub down with a suitable grade of abrasive paper and remove all dust from the surfaces.
Surfaces must be suitably dry and free from anything that will interfere with the adhesion of the paint.
Prime with one coat of Crown Trade Fastflow Quick Dry Primer Undercoat.

All metals:

Surfaces must be clean and free from anything that will interfere with the materials to be applied.
Lightly abrade to a bright (not polished) surface – excluding galvanised surfaces.
Wash with hot water and Sugar Soap to remove oil, grease or any other contaminants, frequently changing the water.
Rinse thoroughly with clean water and allow to dry.

Fastflow coverage:

For best results apply two coats.
Be aware that newly painted doors and windows should not be closed until the paint is fully dry.

How to Apply Fastflow Quick Dry Satin Finish:

Stir well before use.
Apply using a good quality synthetic brush or a good quality micro fibre medium pile roller to achieve an even layer.
To assist application on porous substrates the surface may be dampened slightly, and maintain a wet edge.
On timber, lay off in the direction of the grain and avoid excessive de-nibbing in-between coats.
If using an airless spray, dilution may be required.

Cleaning your brushes/rollers:

Clean all equipment with clean water immediately after use.

Also available in 2.5L FastFlow Quick Dry Satin

The post Crown Trade – FastFlow Quick Dry Satin Finish – Colour – 1L appeared first on Midi Décor St Chinian.

You can choose a paint colour from the RAL Classic range by clicking on the colour grid provided or contact us if you a have a specific colour in mind and we can tell you whether we can make it for you.

We are available via WhatsApp – click here:
And email: mididecorstchinian@gmail.com

Crown Trade Matt Vinyl has excellent opacity with good colour retention and a low sheen finish, which is quick drying. A true flat matt

Limitations:

Matt Vinyl is for interior use only.

Do not apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80% during application or the drying period.

The paint is touch dry in 1 hour and recoatable after 4 hours.

Preparation:

All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Porous surfaces should be coated with a ‘mist’ coat of Crown Trade Matt Vinyl diluted with 40% clean water by volume.
Remove all loose, failing or suspect paint.
Fill any fixing holes, cracks and shallow surface defects with a filler.
Any glossy or eggshell surfaces should be wet abraded to provide a key.
Rinse with clean water to remove all residues.
Allow to dry.

Coating System:

Apply two coats.
Certain colours may require additional coats to give complete coverage.

Application:

Stir well before use.
Apply using good quality tools – synthetic brush or medium pile roller.
For airless spray dilution may be required.
For further information follow the spray manufacturer’s guidelines.

Cleaning:

Return surplus material to container. Wash tools & equipment with clean water or a warm soapy solution & rinse immediately after use.

Storage:

Store upright and secure.
Store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage.
Do not store below 5ºC or above 40ºC.

The post Crown Trade – Matt Vinyl – Colour – 250ml appeared first on Midi Décor St Chinian.

You can choose a paint colour from the RAL Classic range by clicking on the colour grid provided or contact us if you a have a specific colour in mind and we can tell you whether we can make it for you.

We are available via WhatsApp – click here:
And email: mididecorstchinian@gmail.com

Crown Trade Matt Vinyl has excellent opacity with good colour retention and a low sheen finish, which is quick drying. A true flat matt

Limitations:

Matt Vinyl is for interior use only.

Do not apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80% during application or the drying period.

The paint is touch dry in 1 hour and recoatable after 4 hours.

Preparation:

All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Porous surfaces should be coated with a ‘mist’ coat of Crown Trade Matt Vinyl diluted with 40% clean water by volume.
Remove all loose, failing or suspect paint.
Fill any fixing holes, cracks and shallow surface defects with a filler.
Any glossy or eggshell surfaces should be wet abraded to provide a key.
Rinse with clean water to remove all residues.
Allow to dry.

Coating System:

Apply two coats.
Certain colours may require additional coats to give complete coverage.

Application:

Stir well before use.
Apply using good quality tools – synthetic brush or medium pile roller.
For airless spray dilution may be required.
For further information follow the spray manufacturer’s guidelines.

Cleaning:

Return surplus material to container. Wash tools & equipment with clean water or a warm soapy solution & rinse immediately after use.

Storage:

Store upright and secure.
Store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage.
Do not store below 5ºC or above 40ºC.

The post Crown Trade – Matt Vinyl – Colour – 2.5L appeared first on Midi Décor St Chinian.

The Primer Undercoat is suitable for interior and exterior joinery and correctly prepared metalwork.

– Breatheasy® (A 99% solvent free, asthma and allergy friendly® paint)
– Feels like a traditional undercoat
– Quick drying
– Interior and exterior use
– Ideal basecoat for Crown Trade Fastflow Quick Dry Satin
– Matt finish

A roller, brush or spray can be used.

Coverage:

Coverage can be up to 15m2/litre, depending on surface texture and porosity.

Primer Undercoat is touch dry in 1-2 hours and recoatable in 4 hours.

Don’t apply when air or substrate temperatures are likely to fall below 8°C or when the relative humidity is above 80% during application or the drying period.

Preparation:

New Surfaces Timber and Timber Based Boards (Including MDF)
Seal any knots and fill fixing holes, open joints and shallow surface defects with a filler.
Rub down with a suitable grade of abrasive paper and remove all dust from the surfaces.
Surfaces must be suitable dry and free from anything that will interfere with the adhesion of the materials to be applied.
Prime with one coat of Crown Trade Fastflow Quick Dry Primer Undercoat.

All metals:
Surfaces must be clean and free from anything that will interfere with the primer.
Lightly abrade to a bright (not polished) surface – excluding galvanised surfaces.
Wash with hot water and Sugar Soap to remove oil, grease or any other contaminants, frequently changing the water.
Rinse thoroughly with clean water.
Allow to dry.

Previously Decorated Surfaces Timber:
Remove all loose and flaking or suspect paint material then seal any knots.
Fill any fixing holes, open joints and shallow surface defects with a filler.
Rub down with a suitable grade of abrasive paper prior to applying Crown Trade Fastflow Quick Dry Primer Undercoat.

Coating System:

Apply one coat as above but be advised that certain colours may require additional coats to give complete coverage.

Application:

Stir well before use.
Apply with a good quality Cervus brush or micro fibre roller in order to achieve an even thickness.
To assist application on porous substrates the surface may be dampened slightly.
Maintain a wet edge.
On timber, lay off in the direction of the grain and avoid excessive de-nibbing inbetween coats.
If using an airless spray, dilution may be required.

Cleaning:

Return surplus material to the container and clean your equipment with warm, soapy water immediately after use.

We are available via WhatsApp – click here: 

The post Crown Trade – Fastflow Primer Undercoat – White – 1L & 2.5L appeared first on Midi Décor St Chinian.

A high quality decorative and protective finish for use over correctly prepared joinery and metal.

– High gloss
– For interior and exterior use
– Exceptionally hard wearing and flexible finish
– Excellent opacity and film build
– High gloss and colour retention
– Good flow properties

Drying Time:

In good conditions: touch dry after 6 hours and recoatable after 16 – 24 hours.
Ensure previous coat is fully dry before application.
A characteristic of the new technology used in this product is that whiteness intensifies as the paint dries.

Coverage:

12-15m² per litre depending on surface texture.

Weather Conditions:

Do not apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80% during application or the drying period.
Do not over apply.
Note: Ensure previous coat is fully dry before application, colder conditions will extend the drying period.

Preparation:

All new metals:
Lightly abrade to a bright (not polished) surface – excluding galvanised surfaces.
Wash with hot water and liquid detergent solution to remove oil, grease or any other contaminants, frequently changing the water.
Rinse thoroughly with clean water.
Allow to dry, then prime.

New Wood Surfaces :
All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Rub down with a suitable grade of abrasive paper and round sharp edges to a 1-3mm radius.
Remove all dust.
Timber with oils/extractives must be swabbed with clean methylated spirits, frequently changing the face of the cloths.
Seal any knots and fill fixing holes, open joints and shallow surface defects with a filler.
Apply a primer and undercoat.

Previously Decorated Wood:
All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Remove all loose, failing or suspect paint.
Remove grey and denatured surfaces by rubbing down with abrasive paper.
Feather edges of sound paint.
Remove all dust.
Remove any defective putty glazing, clean and prime rebates, replacement putties must be allowed to form a hard skin.
Seal any knots and fill fixing holes, open joints and shallow surface defects with a filler.
Wash remaining sound paint with hot water and liquid detergent solution to remove any contaminants, frequently changing the water.
Wet abrade to provide a key.
Rinse with clean water to remove all residues.
Allow to dry.

Application:

Stir well before and during use.
Apply using good quality tools – synthetic or bristle brush or short/medium pile roller.
Maintain a wet edge.

Cleaning:

Return surplus material to container.
Wash tools & equipment with White Spirit immediately after use.

Storage:

Store upright and secure.
Store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage.
Do not store below 5ºC or above 40ºC.

The post Crown Trade – Full Gloss – RAL 2003 – 2.5L appeared first on Midi Décor St Chinian.

Solvent Based – clean brushes with White Spirit

A high quality, decorative and protective finish for use over correctly prepared joinery and metal.

– High gloss
– For interior and exterior use
– Exceptionally hard wearing and flexible finish
– Excellent opacity and film build
– High gloss and colour retention
– Good flow properties

Drying Time:

In good conditions: touch dry after 6 hours and recoatable after 16 – 24 hours.
Ensure previous coat is fully dry before application.
A characteristic of the new technology used in this product is that whiteness intensifies as the paint dries.

Coverage:

12-15m² per litre depending on surface texture.

Weather conditions:

Do not apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80% during application or the drying period.
Do not over apply.
Note: Ensure previous coat is fully dry before application; colder conditions will extend the drying period.

Preparation

All new metals:
Lightly abrade to a bright (not polished) surface – excluding galvanised surfaces.
Wash with hot water and liquid detergent solution to remove oil, grease or any other contaminants, frequently changing the water.
Rinse thoroughly with clean water.
Allow to dry then prime.

New Wood Surfaces :
All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Rub down with a suitable grade of abrasive paper and round sharp edges to a 1-3mm radius.
Remove all dust.
Timber with oils/extractives must be swabbed with clean methylated spirits, frequently changing the face of the cloths.
Seal any knots.
Fill any fixing holes, open joints and shallow surface defects with a filler.
Apply a primer and undercoat.

Previously Decorated Wood:
All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Remove all loose, failing or suspect paint.
Remove grey and denatured surfaces by rubbing down with abrasive paper.
Feather edges of sound paint.
Remove all dust.
Remove any defective putty glazing, clean and prime rebates, replacement putties must be allowed to form a hard skin.
Seal any knots.
Fill any fixing holes, cracks and shallow surface defects with a filler.
Wash remaining sound paint with hot water and liquid detergent solution to remove any contaminants, frequently changing the water.
Wet abrade.
Rinse with clean water to remove all residues.
Allow to dry.

Application:

Stir well before and during use.
Apply using good quality tools – synthetic or bristle brush or short/medium pile roller.
Maintain a wet edge.

Cleaning:

Return surplus paint to container.
Wash tools & equipment with White Spirit immediately after use.

Storage:

Store upright and secure.
Store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage.
Do not store below 5ºC or above 40ºC.

The post Crown Trade – Full Gloss – RAL 1033 – 2.5L appeared first on Midi Décor St Chinian.

Crown Trade – Full Gloss is solvent based – clean brushes with White Spirit.

A high quality decorative and protective finish for use over correctly prepared joinery and metal.

– High gloss
– For interior and exterior use
– Exceptionally hard wearing and flexible finish
– Excellent opacity and film build
– High gloss and colour retention
– Good flow properties

Drying Time:

In good conditions: touch dry after 6 hours and recoatable after 16 – 24 hours.
Ensure previous coat is fully dry before application.
A characteristic of the new technology used in this product is that whiteness intensifies as the paint dries.

Coverage:

12-15m² per litre depending on surface texture.

Weather conditions:

Do not apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80% during application or the drying period.
Do not over apply.
Note: Ensure previous coat is fully dry before application, colder conditions will extend the drying period.

Preparation:

All new metals:
Lightly abrade to a bright (not polished) surface – excluding galvanised surfaces.
Wash with hot water and liquid detergent solution to remove oil, grease or any other contaminants, frequently changing the water.
Rinse thoroughly with clean water.
Allow to dry, then prime.

New Wood Surfaces :
All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Rub down with a suitable grade of abrasive paper and round sharp edges to a 1-3mm radius.
Remove all dust.
Timber with oils/extractives must be swabbed with clean methylated spirits, frequently changing the face of the cloths.
Seal any knots.
Fill any fixing holes, open joints and shallow surface defects with a filler.
Apply a primer and undercoat.

Previously Decorated Wood:
All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Remove all loose, failing or suspect paint.
Remove grey and denatured surfaces by rubbing down with abrasive paper.
Feather edges of sound paint.
Remove all dust.
Remove any defective putty glazing, clean and prime rebates, replacement putties must be allowed to form a hard skin.
Seal any knots.
Fill any fixing holes, cracks and shallow surface defects with a filler.
Wash remaining sound paint with hot water and liquid detergent solution to remove any contaminants, frequently changing the water.
Wet abrade to provide a key.
Rinse with clean water to remove all residues.
Allow to dry.

Application:

Stir well before and during use.
Apply using good quality tools – synthetic or bristle brush or short/medium pile roller.
Maintain a wet edge.

Cleaning:

Return surplus material to the container.
Wash tools & equipment with White Spirit immediately after use.

Storage:

Store upright and secure.
Store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage.
Do not store below 5ºC or above 40ºC.

Crown Trade – Full Gloss – RAL 5001 – 2.5L

The post Crown Trade – Full Gloss – RAL 5001 – 2.5L appeared first on Midi Décor St Chinian.

Crown Trade Matt Vinyl Emulsion.
A premium quality matt, water based emulsion for interior use on wall and ceiling surfaces, where a flat non-reflective finish is required.

Crown Trade Matt Vinyl has excellent opacity with good colour retention and a low sheen finish, which is quick drying. A true flat matt.

Limitations:

Matt Vinyl is for interior use only.

Do not apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80% during application or the drying period.

The paint is touch dry in 1 hour and recoatable after 4 hours.

Preparation:

All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Porous surfaces should be coated with a ‘mist’ coat of Crown Trade Matt Vinyl diluted with 40% clean water by volume.
Remove all loose, failing or suspect paint.
Fill any fixing holes, cracks and shallow surface defects with a filler.
Any glossy or eggshell surfaces should be wet abraded to provide a key.
Rinse with clean water to remove all residues.
Allow to dry.

Coating System:

Apply two coats.
Certain colours may require additional coats to give complete coverage.

Application:

Stir well before use.
Apply using good quality tools – synthetic brush or medium pile roller.
For airless spray dilution may be required.
For further information follow the spray manufacturer’s guidelines.

Cleaning:

Return surplus material to container. Wash tools & equipment with clean water or a warm soapy solution & rinse immediately after use.

Storage:

Store upright and secure.
Store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage.
Do not store below 5ºC or above 40ºC.

We are available via WhatsApp – click here:
And email: mididecorstchinian@gmail.com

The post Crown Trade – Matt Vinyl – RAL 1006 – 2.5L appeared first on Midi Décor St Chinian.