Step & Tile – Gloss Black 250ml.
Step & Tile Gloss Paint – quick drying high performance interior and exterior paint for tiles, concrete, bricks.
Not for glazed or quarry tiles.
Water based.
Hard wearing, durable, weather resistant
Quick drying – contains a special black pigment for good covering.
Preparation:
Surface must be clean, smooth, dry, free from wax and dust.
Wax polish previously applied can be removed with white spirit, steel wool and a clean rag.
Existing paint on the surface needs sanding to provide a key and then wipe down and allow to dry.
Application:
STIR WELL BEFORE USE.
Use a good quality brush, apply paint evenly.
Two coats is usually sufficient.
Drying Time:
30 minutes depending on temperature or humidity.
Don’t apply outdoors if rain is imminent.
Re-coating Time:
4 hours between coats or overnight, depending on temperature/humidity.
Temperarature:
15-25°C. Don’t use below 10°C or in conditions of high humidity or if rain is imminent.
Coverage:
14 sq. metres per litre, per coat, depending on absorbency of surface.
Maintenance:
Re-apply when surface becomes worn.
Compatibility:
Can be applied over most paints, test for compatibility before applying.
Shelf-life/Storage:
It will last many years if stored in original, tightly closed container in normal conditions.
Hazards:
Keep out of the reach of children.
Avoid contact with skin and eyes.
After contact with skin wash immediately with plenty of soap and water.
Clean-Up:
Remove excess product from the brush, clean with water.
DATA: https://www.rustins.ltd/images/files/1514-PDS-Quick%20Dry%20Step%20and%20Tile%20Paint%20PDS.pdf
