You can choose a paint colour from the RAL Classic range by clicking on the colour grid provided or contact us if you a have a specific colour in mind and we can tell you whether we can make it for you.

We are available via WhatsApp – click here:
And email: mididecorstchinian@gmail.com

Crown Trade Matt Vinyl has excellent opacity with good colour retention and a low sheen finish, which is quick drying. A true flat matt

Limitations:

Matt Vinyl is for interior use only.

Do not apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80% during application or the drying period.

The paint is touch dry in 1 hour and recoatable after 4 hours.

Preparation:

All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Porous surfaces should be coated with a ‘mist’ coat of Crown Trade Matt Vinyl diluted with 40% clean water by volume.
Remove all loose, failing or suspect paint.
Fill any fixing holes, cracks and shallow surface defects with a filler.
Any glossy or eggshell surfaces should be wet abraded to provide a key.
Rinse with clean water to remove all residues.
Allow to dry.

Coating System:

Apply two coats.
Certain colours may require additional coats to give complete coverage.

Application:

Stir well before use.
Apply using good quality tools – synthetic brush or medium pile roller.
For airless spray dilution may be required.
For further information follow the spray manufacturer’s guidelines.

Cleaning:

Return surplus material to container. Wash tools & equipment with clean water or a warm soapy solution & rinse immediately after use.

Storage:

Store upright and secure.
Store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage.
Do not store below 5ºC or above 40ºC.

The post Crown Trade – Matt Vinyl – Colour – 1L appeared first on Midi Décor St Chinian.

FastFlow Quick Dry Satin Finish has an excellent opacity, and a fabulous smooth, attractive finish.

The paint has all the characteristics of a traditional solvent based satin, with the added benefits of a water based formulation, including quick drying and low odour.

You can choose a paint colour from the RAL Classic range by clicking on the colour grid provided or contact us if you a have a specific colour in mind and we can tell you whether we can make it for you.

We are available via WhatsApp – click here:
And email: mididecorstchinian@gmail.com

Drying Time:

In good conditions, Fastflow is touch dry after 1-2 hours and recoatable in 4-6 hours but always ensure that the previous coat is fully dry though before applying a second coat.
During low temperatures or high humidity, drying times may be extended.
Fastflow finishes to a satin sheen.

Coverage:

Can cover up to 15m² per litre depending on the surface texture.

Limitations:

Don’t apply when the air or substrate temperatures are likely to fall below 8°C, or when the relative humidity is above 80% during application or the drying period, as this could affect the adhesion of the paint to the surface.

How to prepare new surface timber and timber based boards (Including MDF):

Seal any knots and fill fixing holes, open joints and shallow surface defects with a filler.
Rub down with a suitable grade of abrasive paper and remove all dust from the surfaces.
Surfaces must be suitably dry and free from anything that will interfere with the adhesion of the paint.
Prime with one coat of Crown Trade Fastflow Quick Dry Primer Undercoat.

All metals:

Surfaces must be clean and free from anything that will interfere with the materials to be applied.
Lightly abrade to a bright (not polished) surface – excluding galvanised surfaces.
Wash with hot water and Sugar Soap to remove oil, grease or any other contaminants, frequently changing the water.
Rinse thoroughly with clean water and allow to dry.

Fastflow coverage:

For best results apply two coats.
Be aware that newly painted doors and windows should not be closed until the paint is fully dry.

How to Apply Fastflow Quick Dry Satin Finish:

Stir well before use.
Apply using a good quality synthetic brush or a good quality micro fibre medium pile roller to achieve an even layer.
To assist application on porous substrates the surface may be dampened slightly, and maintain a wet edge.
On timber, lay off in the direction of the grain and avoid excessive de-nibbing in-between coats.
If using an airless spray, dilution may be required.

Cleaning your brushes/rollers:

Clean all equipment with clean water immediately after use.

Also available in 2.5L FastFlow Quick Dry Satin

The post Crown Trade – FastFlow Quick Dry Satin Finish – Colour – 1L appeared first on Midi Décor St Chinian.

You can choose a paint colour from the RAL Classic range by clicking on the colour grid provided or contact us if you a have a specific colour in mind and we can tell you whether we can make it for you.

We are available via WhatsApp – click here:
And email: mididecorstchinian@gmail.com

Crown Trade Matt Vinyl has excellent opacity with good colour retention and a low sheen finish, which is quick drying. A true flat matt

Limitations:

Matt Vinyl is for interior use only.

Do not apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80% during application or the drying period.

The paint is touch dry in 1 hour and recoatable after 4 hours.

Preparation:

All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Porous surfaces should be coated with a ‘mist’ coat of Crown Trade Matt Vinyl diluted with 40% clean water by volume.
Remove all loose, failing or suspect paint.
Fill any fixing holes, cracks and shallow surface defects with a filler.
Any glossy or eggshell surfaces should be wet abraded to provide a key.
Rinse with clean water to remove all residues.
Allow to dry.

Coating System:

Apply two coats.
Certain colours may require additional coats to give complete coverage.

Application:

Stir well before use.
Apply using good quality tools – synthetic brush or medium pile roller.
For airless spray dilution may be required.
For further information follow the spray manufacturer’s guidelines.

Cleaning:

Return surplus material to container. Wash tools & equipment with clean water or a warm soapy solution & rinse immediately after use.

Storage:

Store upright and secure.
Store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage.
Do not store below 5ºC or above 40ºC.

The post Crown Trade – Matt Vinyl – Colour – 250ml appeared first on Midi Décor St Chinian.

You can choose a paint colour from the RAL Classic range by clicking on the colour grid provided or contact us if you a have a specific colour in mind and we can tell you whether we can make it for you.

We are available via WhatsApp – click here:
And email: mididecorstchinian@gmail.com

Crown Trade Matt Vinyl has excellent opacity with good colour retention and a low sheen finish, which is quick drying. A true flat matt

Limitations:

Matt Vinyl is for interior use only.

Do not apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80% during application or the drying period.

The paint is touch dry in 1 hour and recoatable after 4 hours.

Preparation:

All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Porous surfaces should be coated with a ‘mist’ coat of Crown Trade Matt Vinyl diluted with 40% clean water by volume.
Remove all loose, failing or suspect paint.
Fill any fixing holes, cracks and shallow surface defects with a filler.
Any glossy or eggshell surfaces should be wet abraded to provide a key.
Rinse with clean water to remove all residues.
Allow to dry.

Coating System:

Apply two coats.
Certain colours may require additional coats to give complete coverage.

Application:

Stir well before use.
Apply using good quality tools – synthetic brush or medium pile roller.
For airless spray dilution may be required.
For further information follow the spray manufacturer’s guidelines.

Cleaning:

Return surplus material to container. Wash tools & equipment with clean water or a warm soapy solution & rinse immediately after use.

Storage:

Store upright and secure.
Store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage.
Do not store below 5ºC or above 40ºC.

The post Crown Trade – Matt Vinyl – Colour – 2.5L appeared first on Midi Décor St Chinian.

There’s a number of ways you can choose a paint colour:
From the RAL Classic range by clicking on the colour grid.
Or contact us if you a have a specific colour in mind and we can tell you whether we can make it for you.

We are available via WhatsApp – click here:
And email: mididecorstchinian@gmail.com

Sandtex Trade – Eggshell X-tra is a high performance, solvent based eggshell finish, which has been specially formulated to provide long lasting protection for interior and exterior joinery and suitably primed metal.

Ideally your project will need a suitable, solvent based primer undercoat and Sandtex Trade Flexible Primer Undercoat is the perfect partner.

Drying Time:

In good conditions, touch dry after six hours and recoatable after sixteen – twenty-four hours.
Previous coat must be fully dry before another application.

Coverage:

12-15m² per litre depending on the surface texture.

Weather conditions:

Don’t apply when air or substrate temperatures are likely to fall below 8ºC.
Avoid painting when the relative humidity is above 80% during application or drying period.

Preparation:
All new metals:

Lightly abrade to a bright (not polished) surface – excluding galvanised surfaces.
Wash with hot water and Sugar Soap to remove oil, grease or any other contaminants.
Rinse thoroughly with clean water, allow the surface to dry, then prime.

New Wood Surfaces :

Surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Rub down with a suitable grade of abrasive paper and round sharp edges to a 1-3mm radius, remove all dust.
Timber with oils or extractives must be swabbed with clean methylated spirits, frequently changing the face of the cloth.
Treat knots with two coats of  knotting and fill any fixing holes, open joints and shallow surface defects with a filler.
Apply the primer undercoat.

Previously Decorated Wood:

Surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Remove all loose, failing or suspect paint, also remove grey and denatured surfaces by rubbing down with abrasive paper and feather edges of sound paint.
Remove all dust, and any defective putty glazing.
Clean and prime rebates, aiso replacement putties must be allowed to form a hard skin before being painted.
Treat knots with two thin coats of knotting and fill any fixing holes, cracks and shallow surface defects with a filler.
Wash remaining sound paint with hot water and a liquid detergent solution to remove any contaminants.
Wet abrade to provide a key, rinse with clean water to remove all residues and allow to dry.

APPLICATION:
Stir well before and during use.
Apply using good quality tools – a synthetic or bristle brush or a short/medium pile roller and maintain a wet edge.

CLEANING:
Return surplus material to container.
Wash tools and equipment with White Spirit immediately after use.

STORAGE:
Store upright and secure.
Store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage.
Don’t store below 5ºC or above 40ºC.

The post Sandtex Trade – Eggshell X-tra – Colour – 2.5L appeared first on Midi Décor St Chinian.

There’s a number of ways you can choose a paint colour:
From the RAL Classic range by clicking on colour grid.
Or contact us if you a have a specific colour in mind and we can tell you whether we can make it for you.

We are available via WhatsApp – click here:
And email: mididecorstchinian@gmail.com

Sandtex Trade – Eggshell X-tra is a high performance, solvent based eggshell finish, which has been specially formulated to provide long lasting protection for interior and exterior joinery and suitably primed metal.

Ideally your project will need a suitable, solvent based primer undercoat and Sandtex Trade Flexible Primer Undercoat is the perfect partner.

Drying Time:

In good conditions, touch dry after six hours and recoatable after sixteen – twenty-four hours.
Previous coat must be fully dry before another application.

Coverage:

12-15m² per litre depending on the surface texture.

Weather conditions:

Don’t apply when air or substrate temperatures are likely to fall below 8ºC.
Avoid painting when the relative humidity is above 80% during application or drying period.

Preparation:
All new metals:

Lightly abrade to a bright (not polished) surface – excluding galvanised surfaces.
Wash with hot water and Sugar Soap to remove oil, grease or any other contaminants.
Rinse thoroughly with clean water, allow the surface to dry, then prime.

New Wood Surfaces :

Surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Rub down with a suitable grade of abrasive paper and round sharp edges to a 1-3mm radius, remove all dust.
Timber with oils or extractives must be swabbed with clean methylated spirits, frequently changing the face of the cloth.
Treat knots with two coats of  knotting and fill any fixing holes, open joints and shallow surface defects with a filler.
Apply the primer undercoat.

Previously Decorated Wood:

Surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Remove all loose, failing or suspect paint, also remove grey and denatured surfaces by rubbing down with abrasive paper and feather edges of sound paint.
Remove all dust, and any defective putty glazing.
Clean and prime rebates, aiso replacement putties must be allowed to form a hard skin before being painted.
Treat knots with two thin coats of knotting and fill any fixing holes, cracks and shallow surface defects with a filler.
Wash remaining sound paint with hot water and a liquid detergent solution to remove any contaminants.
Wet abrade to provide a key, rinse with clean water to remove all residues and allow to dry.

APPLICATION:
Stir well before and during use.
Apply using good quality tools – a synthetic or bristle brush or a short/medium pile roller and maintain a wet edge.

CLEANING:
Return surplus material to container.
Wash tools and equipment with White Spirit immediately after use.

STORAGE:
Store upright and secure.
Store in secure dry conditions inaccessible to children or animals.
Containers should be kept closed during storage.
Don’t store below 5ºC or above 40ºC.

The post Sandtex Trade – Eggshell X-tra – Colour – 1L appeared first on Midi Décor St Chinian.